My Wooden Airplane
Skip Navigation Links.

3/3/2016 - 3/7/2016

Powder Coat

In between sessions of fixing the wing again (see the next page), I started preparing some items to be powder coated. I had to disassemble the landing gear and flight controls in order to have them powder coated. Also, when I was test-fitting the stick grips, I realized that I needed to extend the sticks by 1/2 inch. Here are the flight controls (and seat frames) back from the powder coater. The landing gear and motor mount have also returned, but they are silver instead of black.

Total Time: 5.75 hrs.